Life Fitness Powermill Integrity LED console Reconditioned new steps
- Description
- Additional information
Description
This is a commercial Life Fitness Powermill Integrity series LED console Reconditioned. The Powermill is reconditioned and has as new finish.
Internally it has had all the common parts which fail replaced, chains, rear step rods with bearings and clips and wear bars as shown in the images.
*** This powermill has had all the steps replaced with new steps as shown in images ***
Console is the conventional LED type. Considered in the industry as better, being a lot more reliable than the touch screen variants.
(Original Retail price when new over £10000.00)
The Integrity Series PowerMill Climber uses SureStepSystem™ Technology and a reliable AC motor to ensure smooth motion and a large range of available speeds for a wide range of exercisers. PowerMill has the largest usable step space of any similar product in the industry.
Modular panels make internal access easy for service professionals. The AC motor offers smooth transitions between 25 speed levels (from 12 to 185 steps per minute).
Enhance the cardio experience with black frame colour
Powered by SureStep System Technology: Smooth, motor-driven system allows for 25 speed levels (slow for reconditioning and fast for high-intensity interval training)
Flash Programmable with USB – No
Manager Menu Options – Yes
Product Features
Cup Holders – 2
Integrated Accessory Tray – Yes
Pedals – Wide Non-Slip Two-Tone Stair/Riser
Plug In Accessory – No
Resistance levels – 25
Support Handlebars – Yes
Easy To Remove Headphone Jack – Yes
Heart Rate Monitoring – Hand Sensors
Dimensions (L x W x H) – 55.92 in x 32.81 in x 82.3 in (143 cm x 84 cm x 210 cm)
Weight – 473 lb (215 kg)
3.5mm Headphone Jack – Yes
Max User Weight – 400 lb (182 kg)
Step Up Height 10.5 in (27 cm)
Auto Start No
Power Requirements 100-240 volts, 50/60 HZ, 3 Amps
Please refer to our FAQs for explanation of the reconditioning process.
Q. What is involved in the procedure of reconditioning the equipment?
A. Reconditioning involves the following
Strip Down
All equipment undergoes a disassembly and cleaning process. Panels are removed and undergo repair and refinishing or replacement. Major sub-assemblies such as motors, rollers, electronics, etc. are removed from the main frame. After disassembly, both the chassis and sub-components of each machine are cleaned using an air-lance dust removal technique followed by hand-cleaning. Once cleaned, the chassis and associated sub-assemblies are sent to the painting facility if needed, for sandblasting / grinding and re-powder coating / wet spray.
Initial production stage
Upon entering the production area, each machine and its respective subassemblies are further disassembled and cleaned. New parts are installed they are divided into two categories, either mandatory or optional. Mandatory parts include those parts that have been deemed high attrition based on field usage. Optional parts are those items showing wear after careful examination. Static adjustments such as clearances, belt tensions, etc. are made. After the completion of work in a given station, the unit or subassembly undergoes an in-process audit, before travelling to the next process step.
Final production stage
The reassembled unit is powered up and initial testing begins. Activities in this area include electrical troubleshooting and adjustment, performance quality and integrity testing, and final assembly of items such as panels and labels/decals/stickers. During this final production stage, a technician will run / use the machine and adjustments are made, and any anomalies that may surface are corrected.
Final Inspection
After release from the production area, we inspect the equipment. This is a three-step process, involving careful visual inspection of cosmetic appearance, so the units will appear to have a ‘as new look’. The first step involves a visual inspection. This is done to identify any obvious cosmetic imperfections. The second step involves a review of general operations and running / testing the machines to observe any mechanical problems. The final physical testing and quality inspection is conducted, any problems found are repaired, root cause analysis is performed and corrective action is taken.
Q. What warranty is given with the reconditioned equipment?
A. To keep our prices low on the reconditioned equipment we offer 6 months parts and labour warranty as standard. The length of warranty can be increased. The price works out to £60.00 plus vat for an additional 3 months parts and labour warranty. So for example, 12 months parts and labour warranty would cost an additional £120.00 plus vat. The maximum warranty available on the reconditioned equipment is two years.
Additional information
| Weight | 500 kg |
|---|



























